PASCAL CORPORATION

Gas Spring

All the piping parts should be solely provided by us. If used along with other maker's parts or if the material of parts is not suitable for high pressure gas, it may cause leakage or breakage. 　 Seal tape or seal agent should not be used for hose adaptor (gas pressure shall be sealed with packing).
●　For the connection of hose adaptor,be sure to tighten with spanner,etc.
●　Hose should have a sufficient length with some margin (it is advised to hava 10 or 20%of margin on top of the overall length of piping).
●　Carry out the piping installation without twisting hoses.
●　Piping should not be done with smaller bending radius than the minimum bending radius (R20).
●　Choose an adequate hose nut model to avoid bending the hose at sharp angle.
●　When using a long hose,use a hose clip to fix the hose at the die side to avoid an effect from vibration.
●　If some portion of hose is left loose,make a loop and fix it with belt,etc.to avoid interference.